AudioCodes MediaPack 114 Instrukcja Użytkownika Pobierz pdf (Strona 250)

SIP User's Manual 250 Document #: LTRT-65411

MediaPack Series

4.4.3 Web and Telnet Parameters

The Web- and Telnet-related ini file configuration parameters are described in the table

below.

Table 4-3: Web and Telnet ini File Parameters

Parameter Description

WebAccessList_x

Defines up to ten IP addresses that are permitted to access the

device's Web interface and Telnet interfaces. Access from an

undefined IP address is denied. This security feature is inactive (i.e.,

the device can be accessed from any IP address) when the table is

empty.

For example:

WebAccessList_0 = 10.13.2.66

WebAccessList_1 = 10.13.77.7

The default value is 0.0.0.0 (i.e., the device can be accessed from

any IP address).

For defining the Web and Telnet Access list using the Web interface,

refer to ''Configuring the Web and Telnet Access List'' on page 82.

WebRADIUSLogin

For a description of this parameter, refer to ''Configuring the General

Security Settings'' on page 90.

DisableWebTask

 [0] = Enable Web management (default).

 [1] = Disable Web management.

ResetWebPassword

Resets the username and password of the primary and secondary

accounts to their defaults.

 [0] = Password and username retain their values (default).

 [1] = Password and username are reset (for the default username

and password, refer to User Accounts).

Note: The username and password cannot be reset from the Web

interface (i.e., via AdminPage or by loading an ini file).

WelcomeMessage

This ini file table parameter configures the Welcome message that

appears after a Web interface login. The format of this parameter is

as follows:

[WelcomeMessage ]

FORMAT WelcomeMessage_Index = WelcomeMessage_Text

WelcomeMessage 1 = "..." ;

WelcomeMessage 2 = "..." ;

WelcomeMessage 3 = "..." ;

[\WelcomeMessage]

For Example:

[WelcomeMessage ]

FORMAT WelcomeMessage_Index = WelcomeMessage_Text

WelcomeMessage 1 = "**********************************" ;

WelcomeMessage 2 = "********* This is a Welcome message ***" ;

WelcomeMessage 3 = "**********************************" ;

[\WelcomeMessage]

Notes:

 Each index represents a line of text in the Welcome message box.

Up to 20 indices can be defined.

 If this parameter is not configured, no Welcome message is

displayed.

1 2 ... 245 246 247 248 249 250 251 252 253 254 255 ... 389 390

Komentarze do niniejszej Instrukcji

Brak uwag

AudioCodes MediaPack 114 Instrukcja Użytkownika Strona 250

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Bramy / kontrolery AudioCodes MediaPack 114