AudioCodes MediaPack MP-124 Instrukcja Użytkownika Pobierz pdf (Strona 26)

Microsoft Lync Server 2013 26 Document #: LTRT-40127

Enhanced Gateway with Analog Devices

4.4 Step 4: Configuring Proxy Sets

This step shows how to configure the Proxy Sets. A Proxy Set is a group of Proxy servers

defined by IP address or fully qualified domain name (FQDN). In the example scenario, the

following four Proxy Sets are added:



Microsoft Lync Server 2013 for the Gateway entity



Microsoft Lync Server 2013 for the SBC entity



Internal leg to be reached by the Gateway entity



Internal leg to be reached by the SBC entity

Note: These Proxy Sets will later be associated with IP Groups.

 To add Proxy Sets:

1. Open the Proxy Sets Table page (Configuration tab > VoIP > Control Network >

Proxy Sets Table).

2. Add a Proxy Set for Lync Server for the Gateway entity:

a. Configure these parameters:

Parameter Example Setting

Proxy Set ID 1

Proxy Address "FE15.ilync15.local:5067"

(Lync Mediation Server 2013 FQDN and destination

port for Gateway Trunk)

Transport Type TLS

Enable Proxy Keep Alive Using Options

Proxy Load Balancing Method Round Robin

Is Proxy Hot Swap Yes

SRD Index 1 (Enables classification by Proxy Set for this SRD

in the IP Group belonging to it)

b. Click Submit.

Figure 4-7: Proxy Set for Microsoft Lync Server 2013 (Gateway Entity)

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 97 98

Brak uwag

AudioCodes MediaPack MP-124 Instrukcja Użytkownika Strona 26