AudioCodes MediaPack MP-124 Instrukcja Użytkownika Pobierz pdf (Strona 21)

Configuration Note 4. Configuring the Device

Version 6.6 21 September 2013

4.1 Step 1: Modifying IP Address to the Device

This section describes how to modify the IP address of the device.

 To modify the existing LAN network interface:

1. Open the “Multiple Interface Table” page (Configuration > Network Settings > IP

Settings).

2. Select the 'Index' radio button adjacent to Application Type OAMP + Media + Control

and click Edit.

3. Configure like this:

Figure 4-2: IP Settings Screen (Multiple Network Interface)

Parameter Setting for IPv4 Example Setting for IPv6

Application Type OAMP + Media + Control

(application)

Media + Control.

The OAMP application can be

configured only with IPv4.

Interface Mode IPv4 Manual IPv6 Manual

IP Address 10.15.9.131

(device IP address)

2001::131

(only a global address can be

entered)

Prefix Length 16 for 255.255.0.0

(Subnet mask, in bits)

64 (only 64 is supported)

Gateway Default Gateway

10.15.0.1

2001::1

VLAN ID VLAN ID 1 1

Interface Name Arbitrary descriptive name

"Voice"

IP6Voice

Primary DNS Server

IP Address

DNS IP address

10.15.25.1

2001::10

4. Click Apply, and then click Done to apply and validate your settings.

5. Reset the device with a burn to flash for this setting to take effect (see Section 4.16

on page 70).

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 97 98

Brak uwag

AudioCodes MediaPack MP-124 Instrukcja Użytkownika Strona 21