AudioCodes Mediant 3000 Instrukcja Użytkownika Pobierz pdf (Strona 39)

Configuration Note 4. Configuring AudioCodes E-SBC

Microsoft Lync and XO Technology SIP Trunk 39 AudioCodes Mediant E-SBC

4.3.3 Step 3c: Configure SIP Signaling Interfaces

This step describes how to configure SIP Interfaces. For the interoperability test topology,

an internal and external SIP Interface must be configured for the E-SBC.

 To configure SIP Interfaces:

1. Open the SIP Interface Table page (Configuration tab > VoIP menu > Control

Network > SIP Interface Table).

2. Configure a SIP interface for the LAN:

Parameter Value

Index

Network Interface

Voice

Application Type

SBC

TLS Port

5067

TCP and UDP

SRD

3. Configure a SIP interface for the WAN:

Parameter Value

Index

Network Interface

WANSP

Application Type

SBC

UDP Port

5060

TCP and TLS

SRD

The configured SIP Interfaces are shown in the figure below:

Figure 4-10: Configured SIP Interfaces in SIP Interface Table

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 77 78

Brak uwag

AudioCodes Mediant 3000 Instrukcja Użytkownika Strona 39