AudioCodes MEDIAPACK VERSION 6.2 Instrukcja Użytkownika Strona 10

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 51
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 9
CTM; Reviewed:
SPOC 11/29/2007
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
10 of 51
AudioCodesMP118.doc
Step Description
9. Use the change public-unknown-numbering 0 command to define the full calling
party number to be sent to the far-end. Add an entry for the trunk group defined in
Step 7. In the example shown below, all calls originating from a 5-digit extension
beginning with 4 and routed across trunk group 1 will be sent as a 5 digit calling
number. This calling party number will be sent to the far-end in the SIP “From”
header.
10. Create a route pattern that will use the SIP trunk that connects to Avaya SES. In
general, a route pattern is not required for calling between SIP endpoints registered to
the Avaya SES. This includes the dialing scenarios performed in the compliance test.
However, some transfer scenarios using alpha-numeric handles (i.e., user names)
instead of extensions require a default route pattern. The creation of this default route
pattern is included here for completeness.
To create a route pattern, use the change route-pattern n command, where n is the
number of an unused route pattern. Enter a descriptive name for the Pattern Name
field. Set the Grp No field to the trunk group number created for the SIP trunk. Set
the Facility Restriction Level (FRL) field to a level that allows access to this trunk for
all users that require it. The value of 0 is the least restrictive level. The default values
may be retained for all other fields.
change public-unknown-numbering 0 Page 1 of 2
NUMBERING - PUBLIC/UNKNOWN FORMAT
Total Total
Ext Ext Trk CPN CPN Ext Ext Trk CPN CPN
Len Code Grp(s) Prefix Len Len Code Grp(s) Prefix Len
5 4 1 5
change route-pattern 1 Page 1 of 3
Pattern Number: 3 Pattern Name: SIP
SCCAN? n Secure SIP? n
Grp FRL NPA Pfx Hop Toll No. Inserted DCS/ IXC
No Mrk Lmt List Del Digits QSIG
Dgts Intw
1: 1 0 n user
2: n user
3: n user
4: n user
5: n user
6: n user
BCC VALUE TSC CA-TSC ITC BCIE Service/Feature PARM No. Numbering LAR
0 1 2 3 4 W Request Dgts Format
Subaddress
1: y y y y y n n rest none
2: y y y y y n n rest none
3: y y y y y n n rest none
4: y y y y y n n rest none
5: y y y y y n n rest none
6: y y y y y n n rest none
Przeglądanie stron 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 50 51

Komentarze do niniejszej Instrukcji

Brak uwag