AudioCodes MEDIAPACK VERSION 6.2 Instrukcja Użytkownika Pobierz pdf (Strona 34)

MediaPack BRI Series

User's Manual 34 Document #: LTRT-83702

3.4.4 Connecting the RS-232 Serial Interface

The RS-232 interface can be used for local configuration using Command Line Interface

(CLI). For a description on accessing the CLI using the RS-232 interface, refer to Section

'RS-232 Interface' on page 68.

¾ To connect the MediaPack's RS-232 interface, take the following

step:

 Using a standard RS-232 straight cable (not a cross-over cable) with DB-9

connectors, connect the MediaPack's RS-232 port (labeled RS232) to either the

COM1 or COM2 RS-232 communication port on your PC.

The required connector pinouts and gender are shown below in Figure 3-9.

Figure 3-9: MediaPack RS-232 Connector Pinouts

3.4.5 Connecting the Lifeline Port

To implement the Lifeline feature, port S/T 0 must be configured as network port. When a

power outage occurs, the lifeline phone (connected to port S/T 0) can continue making

calls (although this time, through the PSTN network, not the WAN).

¾ To connect the Lifeline port:

1. On the MediaPack's rear panel, connect the ISDN telephone to S/T port (labeled S/T

O).

2. On the MediaPack's rear panel, connect the PSTN network to the lifeline port (labeled

Lifeline).

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 179 180

Brak uwag

AudioCodes MEDIAPACK VERSION 6.2 Instrukcja Użytkownika Strona 34