5 Configuration
Methods:
Manipulation of the supplied .ini file, then uploading it via the web interface. This method
is recommended for a quick start scenario. The I3 supplied .ini file, with just a few
modifications will get a basic setup up and running. Please note, the I3 supplied .ini file is
not meant to be a drop in configuration for every environment, it is provided as reference
only.
Web interface. (This method was used to configure the unit during validation) There are
many advanced options that are exposed in the web interface. Caution should be
exercised and the Audiocodes documentation should always be referenced when using
the web interface configuration option.
TFTP. This has not been tested.
Initial Setup:
Unzip the ZIP file containing the Mediant 2000 configuration files and firmware.
Follow the AudioCodes instructions (on the CD or in the booklet shipped with the Mediant
2000 or in) for getting an IP address assigned to the MP box.
Modify the I3 provided .ini file as appropriate.
Start a web browser and type in the IP address of the Mediant 2000.
The default user name is “Admin” (with a capital “A”) and the password is “Admin” (with a
capital “A”). It is recommended to change the password at this time for security reasons.
In Interaction Administrator, the line that is configured for the gateway should have
“Terminate Analysis on Connect” checked.
Download Current Firmware (CMP file):
From the main web screen, select Software Update from the icons on the left side of the
page.
Depending on what version of firmware is currently running on the Mediant 2000, two
options will be available, “Software File-Download” or “Software Upgrade Wizard”
Choose the appropriate option and load the validated version of firmware onto the
Mediant 2000.
After the validated firmware has been applied the Mediant 2000 will restart. Once the
restart is complete, return to the web interface and click on “Status & Diagnostics” on the
left hand side of the screen. Then select “System Information” from the top of the screen.
The displayed Version ID should match the firmware version as noted in section 1.1.3. If
it does not, double check the upgrade steps and consult the Audiocodes documentation if
necessary.
Download Auxiliary File(s):
From the Software Update Section, select “Load Auxiliary Files”
Click the browse button to select the auxiliary file to download, then click “Send File.”
During the validation procedure, the only auxiliary file option tested was the E&M Wink
CAS file for T1 signaling.
Repeat the steps in this section any additional auxiliary files required for this installation.
Changing the Configuration:
Prior to making any changes, the Audiocodes documentation should be consulted for
information on configuration parameters, options and functions.
Changes can be made via the web interface or the .ini file can be modified and re-
downloaded to the Mediant 2000.
(12 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji