AudioCodes MP-1FXS Instrukcja Użytkownika Pobierz pdf (Strona 5)

Configuring Analog Extensions with AudioCodes Gateways Page 5 of 25

2. On the General tab, configure the following settings.

Figure 2: Configure IP Extension settings

3. Select PBX > AltiGen IP Phone Configuration.

4. For extension 167, clear the checkbox Enable SIP Telephony Service.

Figure 3: Disable SIP Telephony Service

5. Select VoIP > Enterprise Network Management > Codec > Codec Profile Table. Add a new profile,

“OnPremise.”

Figure 4: Create a new codec profile

• Check Enable IP Extension.

• Check Connect Voice Stream to Server. (If

you clear this checkbox, conferences will

fail.)

• Check Enable 3rd Party SIP Device.

• Enter a SIP Registration Password. We

use 5656 in this example.

• Set Codec to G.711 Mu-Law.

• Set DTMF Delivery to RFC 2833.

• Set SIP Early Media to Disable.

1 2 3 4 5 6 7 8 9 10 ... 24 25

Brak uwag

AudioCodes MP-1FXS Instrukcja Użytkownika Strona 5